Posts

126 Apartments LEED Gold Certified in East Lansing

The 126 apartments that were renovated for this project were made possible by the Hometown Housing Partnership (HHP) of East Lansing.  HHP is a nonprofit that has been providing access to affordable housing for over 20 years, and was formerly known as East Lansing Housing and Neighborhood services.  In 2012 HHP became the managing general partner of 126 units of affordable housing at Deerpath Apartments and partnered with Hollander Development to complete renovate the townhomes.

A large amount of materials were reused in rehabbing the home including: exterior framing and siding, foundation, cabinets, counters, roof framing, and the roof, floor, and 2/3 the wall sheathing.  A 800 watt solar photovoltaic collector system is installed on top of the carports, which provides electricity for the lighting of the carports.   All interior and exterior paints used are water based, low VOC, latex paints.    Each apartment is outfitted with Energy Star certified appliances and energy efficient lighting.

 

LEED Checklist
    Project Details:
Type                               Multifamily
Conditioned Space   (126) 988 sq. ft. apartments
Bedrooms                     2
Bathrooms                   1
Lot Type                       Previously Developed
Construction Type   Affordable
   Key Features:
Air Filtration             MERV 10
Roof Insulation        R50
Wall Insulation         R15
HVAC Efficiency       94% AFUE
800 Watt Solar Panels installed on the carport
Efficient Outdoor LED and Indoor Lighting

Renae Hesselink Muskegon Homeowner goes solar!

Renae Hesselink is the first in West Michigan homeowner to sign up for the program and just completed her panel install Monday May 19th. Renae served as the past Chair of the US Green Building Council West Michigan (USGBCWM) and is a local sustainability leader.

Tell us about the processRenea Headshot & Solar Pv

“Finally after months of waiting, mostly due to the weather, Srinergy along with a local electrician team has  installed the 5Kw solar system on my home. I will be sharing the entire journey soon. I will have access via the web to see what my panels are generating by hour, by day, by week, month, annually. My goal is to help educate the many people out there that solar does work in Michigan and it is affordable. It should produce nearly the amount of electricity that I use on an annual basis with a return on investment”

“I turned on my solar panels around 5:00 p.m. on May 23rd – that was roughly 25 days ago. To date it has produced 554.9 Kwh an average of 23+  Kwh per day. From mid-April until Mid-May I used 434 total Kwh of electricity.  This system has produced above and beyond what I will use in a month’s time for sunnier months so far.”SOLAR PV Muskegon New

What is the Pay back? 

“My Solar PV will have an estimated return on investment of close to 10 years, increase my home value and allow me to take part in the sustainability movement to get away from fossil fuels”.

What about your home energy use?

Before going solar Renae worked with to get home energy audit and a Residential Energy Performance Score and is currently looking at ways to improve her energy efficiency and comfort.

Renae currently is the Vice President of Sustainability at Nichols in Muskegon and is exploring this application for their corporate headquarters and distribution centers.

Stay tuned for case studies 

Here is a photo of the first panel going up

 

 

 

 

 

 

West Michigan Solar PV – 0 Down in Upfront Costs – Qualification Form

MI Solar Works is collaborative across the state to lower the barriers of financing and funding of  solar PV projects by offer no up front cost loans.

We are shifting the debt from the utility company  to affordable & low cost solar loans.

                               MI SOLAR Post Card

Our Goal: 6,000 solar roofs in Michigan with 1,000 in West Michigan by the end of 2014.

Who can participate?

  • Existing Homeowner’s
  • Existing Business Owner’s
  • Planned building and home renovations & rehabs
  • New Construction of residential, commercial or industrial buildings.

Residential New Construction & Existing Homes 

3 – 5 KW Systems Available – Learn more

Commercial New Construction & Existing Buildings 

5 – 100 KW Systems Available – Coming Soon.

Frequently Asked Questions

Financing – MI Saves – 7% unsecured loan available* Learn More

*Other Options for Financing do existing with potentially lower rates, ask your local bank or credit union, refinancing under 203k Loans and/or home equity loans or lines of credit.

Everyone is doing it.  Renea Hesselink, VP Sustainability at Nichols –  5kw Solar Pv Installed in Muskegon

Pyramid Scheme & Meanwhile Bar – Grand Rapids Tami VandenBerg – Grand Rapids

Program in the News. – MIBIZ

Please sign up below for a free assessment to see if you qualify.

Michigan's First Registered New Living Building & LEED Home – Burh Becc @ Beacon Springs

sketch of house on land

Beacon Springs: The Vision

Beacon Springs (Near Ann Arbor) offers hope for life springing from a sustainable dwelling, polyculture gardens amid oak savannah, and a lively gathering place. It is a beacon of hope for a happy, healthy and sustainable future for all.

Sustainable dwelling

Our house at Beacon Springs is named Burh Becc, meaning, in Old English, a dwelling by a creek. This is the origin of our family name Burbeck. Several natural springs on the north edge of the land feed a small creek which runs past the house. Wildlife is drawn to this source of water and vegetation, as were we when we first came to the site. Burh Becc has been designed as a “living building” using the Living Building Challenge standards of the International Living Future Institute (visit living-future.org). A living building becomes an alive component in a sustainable ecosystem, integrated with the natural environment in a way that nurtures and sustains that environment. It is because of this living nature of our house that we have given it a name, and we have designed and built it to serve many future generations.

Water. Our living building uses the rain and snow falling on the roof as its only source of water.

Energy. Burh Becc depends on the rays of the sun for most of its energy needs. Heat is provided mainly through passive solar design. Natural ventilation is provided by the wind drawn through the house by the tower design. Heating and cooling are augmented as needed by a photovoltaic-powered geothermal system.

Waste. Our house is designed to reduce waste products that need to be removed from the site and eliminate materials toxic to human or environmental health. 95% of the by-products normally considered waste are integrated back into the site ecosystem, or are recycled, repurposed or reused by the broader community. A 95% materials efficiency standard was also followed during the construction phase of Burh Becc, leaving only 5% for the local landfill.

Farm amid oak savannah

The farm at Beacon Springs produces food for the local community, particularly those with limited access to fresh produce, as well as for our own table. As with the house, the farm has become an integral part of the ecosystem. Following the principles of permaculture, plants, trees and animals work together for abundant and sustainable production of food. These permaculture methods also restore the fields depleted through decades of “factory farming,” they allow the garden farm to fit together with the rejuvenating oak savannah, and they encourage wise management of water for the benefit of the immediate site and neighboring ecosystems.

Gathering place

Our home has become a wonder-filled gathering place for people (and pets, too). The embrace of Beacon Springs – the living building, with its flourishing courtyard and barnyard animals, combined with the surrounding acres of permaculture gardens and oak savannah – is a balm to the lone poet and a catalyst for lively exchange in larger groups. Beacon Springs is a center of education for the community: architecture students learning about sustainable design; residential building crafts(wo)men and trades professionals learning sustainable construction methods; children learning about barnyard animals and bee-keeping; and permaculture enthusiasts participating in onsite workshops. Beacon Springs also provides a gathering spot for community farming. And we regularly welcome family, friends, co-workers and others to our table for good food and dynamic exchange of life.

A special note for our team of designers, engineers, builders and growers, and the extended team members through the International Living Future Institute: We hope that each of you, in joining the community responsible for the creation of Beacon Springs, has also received an extra measure of life springing from your contribution to the project. You are always welcome to come for a visit, enjoying with us the fruits of your labors.

—Tom and Marti Burbeck, Ann Arbor, Michigan, March 2023

Photos and Info taken from http://www.beaconsprings.org/

Matchbox House LEED Platinum Certified – Ann Arbor

The project started out with an intent to design LEED certified which is reflected in its unconventional design.  The project was modeled after a matchbox and was designed to have four inner quadrants that slip past on another withing the out sleeve of the house, all on top of

2216 Hickman Ann Arbor, Michigan

a raised foundation.   The Matchbox’s compact design contributed to it’s LEED Platinum certification as there was less conditioned area to work on. The architect gathered information from other contractors experienced in green building practices in order to produce a home outside the norm. The result was distinctive, efficient, and compact home surrounded by natural, permeable turf minimizing the impact of the house on the surrounding environment.

The house has four bedrooms, 1,738 sf of conditioned space and a one car garage. It has received LEED Platinum Certification. It has a HERS rating of 47 and many notable features, including FSC wood, reclaimed trim from demolished Michigan barns in the region, no conventional turf (no irrigation) and low flow plumbing fixtures. The house has no attic or basement so upstairs rooms have dramatic ceilings that begin at 3’-0” and end at 16’-0” with an angle ceiling matching that angle of the roof.

No conventional turf or irrigation system was installed around the home, and all fixtures and fittings (toilet, faucets, and showers) are very high efficiency, reducing the site’s water demand by 78%. The wood used in the cabinets, stairs, closets, doors, and upstairs floors are all FSC certified. The house itself is much more compact than a standard house, so much that the LEED threshold dropped by 10 points. The kitchen counter tops and decking are constructed are composite from recycled materials.

The home’s unconventional design earned it 1st Place in Detroit Home Magazine Design Awards 2013 for Contemporary House under 4,000 sq ft.

Project Details:
Location: Ann Arbor, Michigan
Clients: Azar and Hormoz Alizadeh (the house currently is rented out to tenants, it is not currently occupied by the owners)
Project Type:                 Single Family
Conditioned Space:      1,738 sq ft.
Bedrooms:                      4
Bathroom:                     3
Lot Type:                        Infill
Construction Type:     Custom

HERS Rating of 46, expected savings of 54% with a 5 Star+ Energy Rating
44% of Construction Waste Diverted from Landfill

Key Features:

  • 2 kw Solar Panel on roof, reducing energy costs by 18%
  • Wall Insulation R-Value of 29
  • Air Filtration rate, MERV 15
  • Reduced water demand by 76%Hickman checklist
  • Compact home for minimal site impact
  • No irrigation system or conventional turf
  • FSC certified cabinetry, stairs, closets, doors, and upstairs flooring.
  • Energy Star certified appliances and light fixtures
  • 2 ton heat pump/ERV
  • Appropriately sized 40,000 Btu furnace
  • Low flow toilets, faucets and showerheads

Project Team:
Brian Halprin (Green Building Services, Pllc)
Naseem Alizadeh (Bureau for Architecture and Urbanism)
Tad Krear (Landscape architect)
Cory Johnston (Structural engineer)
Matt Snider (Mechanical Engineer)

Photo gallery containing before, after, and during construction pictures:
The Matchbox House: Bureau for Architecture and Urbanism

Feature in Architect Lab’s Online Magazine

2216 Hickman (Matchbox House) Project Profile

 

Matchbox House Certificate

Webinar: Journey to Almost Passive House & LEED Platinum Near-Zero Home

Finally it is here – after 2 years of filming and a big thanks to four Grand Valley State University Interns, 2 hours of video detailed in over 10 sections on the how and why of LEED for Homes and Passive House construction specifically to Sam Pobst’s home.

Sumac Grove Pobst Residence LEED Platinum Home

Sam and some of the other high performance building professionals take us through many aspects: site selection/design, insulation, heating and cooling, passive building, water efficiency and renewable energy. 

What makes it Green? For starters, Michael Holcomb – President/CEO and owner of Home Inspector General has called this “the tightest home I have ever tested.” It comes in at 0.44 ACH @50PA (for all you energy geeks). Michael has test thousands of homes and buildings in the Midwest in his 20 years of experience, so that is saying something.

Next, this project almost achieved Passive House standards! Sam worked with an experienced PHIUS rater “John Semmelhack” to use the advanced modeling software to design his house. The house tested below the air change requirements of Passive House but only made 7.20 KBTu’s as opposed to the required 4.75 (energy geek talk). Sam’s reasoning: “The primary driver of that cost was the building geometry. Since a primary objective was to build a barrier free home, we designed it all to be on one level. This meant that the ratio of exterior wall and roof area to the floor area was not optimal for thermal design (of Passive House). It was more important to us to have the barrier free design than to meet the PH requirements, though we came very close. The only changes we made from the original PH design was to reduce the thickness of the perimeter walls from 22” to 19”, and specify a window that was not quite as high performing as the one that would attain the PH rating.” Sam told me that there was 99 year back on the window required to meet the standard (at that time).

LEED Label for Sumac Grove Sam Pobst LEED certified PlatinumLast, LEED for Homes Platinum Certification has been achieved. This
requires 3rd party onsite verification that proves through actual testing that the home is green.

This must have cost millions right? 

“We spent $167.00/Square Foot, but if you add in O+P, design fees, and my sweat equity, I estimate about a $200/Square Foot cost to construct.” – Sam Pobst

•         Gross Square Feet                         2010

•         Basement Square Feet                851

•         Conditioned Square Feet           2547

•         Garage / Workshop                      621

•         $167/Square Foot  Hard Cost

•         $200/ Square Foot Buildable Cost

  1. + Overhead and Profit
  2. + Design Fees
  3. + Sweat Equity

Objectives

  1. Gain a basic understanding of the Passive House (PH) design standards for homes and products or technologies are needed to achieve it.
  2. Discriminate between LEED, Net Zero, universal design and Passive House objectives and how they interact.
  3. Learn about behind the wall thermal envelope strategies for a super tight and insulated home.
  4. Identify costs, ROI and payback on high performance home LEED projects

Continuing Education

  • 2 GBCI – LEED Specific
  • 2 AIA – LU|HSW
  • 2 MI Contractor (Code & Green)
  • 2 MI Architect
  • If you need continuing education units for a license in another state, this course may apply. Please consult your state’s requirements.

Project utility data update and ROI data

These webinars are free to review. If you are interested in continuing education credits, you must follow the following steps:

1. Read the info above, watch the webinars for FREE and check out the Project Profile.

2. Take the 13 question quiz and score at least 80% to be approved. Please also post a comment below and help add to the conversation.

3. Pay the fee below if this is not taken as part of our GreenHome Associates series to get your certificate and CEUs. You must be a member to pay the reduced member fee.


Webinar Pricing



Further Resources 

Read back on Sam’s progress documented on his Blog and stay informed as he monitors the home’s energy use, durability, comfort, indoor air quality and water use. http://sumacgrove.blogspot.com/2013/01/certified.html

  • Sumac Grove certificateRecorded 1 Hour Webinar on the entire project – 1 AIA/GBCI 
  •  2 Hour GBCI approved Film Series documenting the project from start to post occupancy informed can be seen here for free

Greenest Home in West Michigan Certifies LEED Platinum

LEED Snapshot Main Photo

1 Hour Recorded Webinar Available Now – 1 AIA/GBCI

” In the 5 years I have been involved with and Regional Green Building Certified Homes, I think I can finally throw my 2 cents in the ring and call this the Greenest Home in West Michigan” – Brett Little, Executive Director

What make’s it the Greenest? For starters, Michael Holcomb – President/CEO and owner of Home Inspector General has called this “the tightest home I have ever tested.” It comes in at 0.44 ACH @50PA (for all you energy geeks). Michael has test 1,000’s of homes and buildings in the Midwest in his 20 years of experience so that is saying something.

Next, this project almost achieved passive house standards! Sam worked an experienced PHIUS rater “John Semmelhack” to use the advanced modeling software to design his house. The house tested below the air change requirements of Passive House but only made 7.20 KBTu’s as opposed to the required 4.75 ( Energy Geek Talk)  Sam’s reasoning’s  “The primary driver of that cost was the building geometry.  Since a primary objective was to build a barrier free home, we designed it all to be on one level.  This meant that the ratio of exterior wall and roof area to the floor area was not optimal for thermal design (of Passive House).  It was more important to us to have the barrier free design that to meet the PH requirements, though we came very close.  The only changes we made from the original PH design was to reduce the thickness of the perimeter walls from 22” to 19”, and specify a window that was not quite as high performing as the one that would attain the PH rating.” Sam told me that there was 99 year back on the window required to meet the standard (at that time).

3rd, First Zero Energy Home in West Michigan (if anyone wants to dispute that let us know!). Obviously we can’t officially call it Zero Energy without a year’s worth of data but we will keep you all up to date to see it makes it. The HERS score is not 0 but it is 18 which  is the lowest in West Michigan with A home in Stanwood and hour north getting a 12. There is a lot of mis-information out there stating that  a HERS of zero is required to be “Zero Energy” but in practice we see homes scoring HERS of 35 and  achieving Zero Energy.

LEED Label for Sumac Grove Sam Pobst LEED certified PlatinumLast, LEED for Homes Platinum Certification has been achieved. This
requires 3rd party onsite verification that proves you the home is green through actual testing.

But, but… This project is in Lowell outside of an Urban Area and lacks community resources and connectivity. It’s true, the one place that this house poorly scores is in location efficiency. You can find data to support that reliance on automobiles is more costly and has more CO2 emissions than very well insulated home. Currently Sam is using the home as his office as well  as his living space and so he does not have to drive to an office in a far away location. He can grow alot of food on the site as well and eventually add more solar and purchase an electric car to power it with all Solar.

This must have cost millions right? 

“We spent $167.00/Square Feet, but if you add in O+P, Design fees, and my sweat equity, I estimate about a $200/ SF cost to construct.”

•         Gross SF                                            2010

•         Basement SF                                    851

•         Conditioned SF                               2547

•         Garage / Workshop                      621

•         $167/SF  Hard cost

•         $200/ SF Buildable cost

  1. + Overhead and Profit
  2. + Design fees
  3. + Sweat Equity

 PDF Project Profile Details 

Further Resources 

Read back on Sam’s progress documented on his Blog and stay informed as he monitors the home’s energy use, durability, comfort, indoor air quality and water use. http://sumacgrove.blogspot.com/2013/01/certified.html

  • Sumac Grove certificateRecorded 1 Hour Webinar on the entire project – 1 AIA/GBCI 
  • Sign up for our mailing list  to stay informed on Spring 2013 Tours. Potential GBCI Credit

  • Contact with Questions Sam Pobst, BO+M, BD+C, Homes and ID+C, a USGBC LEED Faculty™
    Principal
    ecometrics llc
    P. 616.897.4967 C. 616.648.7493
    Email sam@ecometrics.biz

 

Ann Arbor Rehab, Green Building, Green Business

Ann Arbor Michigan, a hot bed for sustainable home development is at it again

with a LEED for Homes registered gut rehab that is on track to be Platinum Certified as well as net zero site energy. Dubbed the Rancho Deluxe project, this ambitious rehab will feature both the Atomic Zero Home and a new structure and the home offices of Urban Ashes, a small business owned and operated by Paul Hickman. This home will feature geothermal, occupancy sensors, 10 kws of PV, mostly locally sourced or re used products, storm water reduction, native meadow installed and more. The Urban Ashes Studio addition is rumored to be one of Ann Arbor’s first straw bale wall assemblies once approved by the city and the studio it self is an authentic sustainable business with a triple bottom line. The company utilizes otherwise thrown out city trees to build furniture and picture frames while employing transitional/disabled labor. The company was recently featured in a local West Michigan news story based in a made in Michigan edition

Real numbers for a LEED for Homes Indiana Success Story

The Gulyas residence in Bloomington, Indiana was one of the first homes in Indiana to receive LEED for Homes Platinum certification.  Through the use of passive house techniques and additional sustainable design strategies this project easily met and surpassed the criteria for LEED. 

A home energy metric measuring energy per square foot calculation and spreadsheet was created by Allison Bailes III, PhD, to help effectively measure electric and gas usage in a house.  used this spreadsheet on this project to help get an idea of how efficient the Gulyas residence is.  The number of kilowatt hours per year for electric (no gas is used) at the Gulyas residence is 6,675, which averages to 556.25 kilowatt hours per month.  The cost per year in 2011 was $960.07, averaging to $80.011 per month for all energy heating, cooling & electricity.  The spreadsheet also contains a helpful key which describes the efficiency of the house in terms of kilowatt hour per square foot per year.  Anything less than 5 is considered “super-efficient” and anything above 20 is considered an “energy hog.”  The Gulyas residence uses 4 kilowatt hours per square foot per year, describing it as super-efficient.  Click here for Gulyas’ actual electric bill for the past two years.

In terms of water use, contacted the City of Bloomington Utilities Department to find out the average water use per household in the city.  Each person uses approximately 2,500 gallons of water per month, which equals 2.5 units (1,000 gallons equals 1 unit).  This means that the average 2-person household uses 5 units of water per month, which is substantially higher than the Gulyas residence, which uses approximately 2 water units per month.  Click here to view the Gulyas residence water bill for the past two years.

The Gulyas house is still a work in progress.  Gulyas prioritized energy conservation technologies in the envelope design of the house, and integrated a separate ducted ERV system for exceptional air quality and energy conservation.  He also plans to install a low voltage cable lighting system throughout the open areas of the house, which will have high output 12v LED mr16s.  The new products have a very high color rendition index (CRI) in a variety of color temperatures, making it realistic to create very high quality lighting design while using a fraction of the energy of halogen (8-9 watts per lamp would be used as opposed to 50 watts).  Gulyas would also like to implement rainwater harvesting system, as well as a photovoltaic and/or solar thermal system. 

In summary, the statistics regarding the Gulyas residence are impressive.  He has implemented a variety of energy saving approaches and is looking toward the future to implement additional technologies to create a home that is even more efficient.  Stay tuned to find out what new developments take place as the Gulyas house progresses.

Read more on the project profile here.

 

Despite Heat & Drought, Michigan LEED Platinum Home Stays Cool & Refreshed

“We installed our original cooling system in July 2010 and it has worked reasonably well, but over the last few weeks we’ve had a hot spell with daytime temperatures mostly in the upper 90’s and well over 100 degrees Fahrenheit for a few days. That’s normal in some parts of the world but in Michigan, we consider that HOT! Over two weeks of unusually hot weather the house reached 77 degrees at the warmest point when it was 105 outside, which is actually pretty good since we’re cooling the entire house for about 30 cents per day….The Systems total cooling capacity is very small however, so it is practical only because our total cooling load is very small due to the extreme level of insulation in the house, because our south-facing windows have carefully designed overhangs that block direct sun in mid summer, and because we use very efficient appliances that add very little additional heat to the house.

“Since we’ve had a hot, dry spell for the last 4 weeks we have been using a lot of cistern water for the gardens, and we’re down to about 36 inches or 4,300 gallons, out of a total capacity of 12,000 gallons. Hopefully we’ll get some significant rain soon to replenish our irrigation water supply, but we can refill it from the well if necessary.” – Jay & Liz McClellan.

Learn more at

http://www.brainright.com/OurHouse/Construction/CoolingSystem/enhanced.shtml